Stavatti Aerospace conducts principal business operations in Niagara Falls, NY. Stavatti also maintains an office in Buffalo, NY as well as San Bernardino, CA and Eagan, MN. Stavatti has direct representation in Dayton, Ohio, Washington, D.C. and other support locations worldwide. Stavatti Aerospace Ltd is domiciled in Sheridan, WY. A summary of principal and anticipated Stavatti facilities and locations is provided:
NIAGARA FALLS, NY
The Corporate Headquarters and Primary Prototyping, Development and Manufacturing Center for Stavatti Aerospace is located at 9400 Porter Road, Niagara Falls, NY 14304. On 30 October 2020 Stavatti acquired the former US Army Reserve Center (USARC) to serve as an interim headquarters as well as a Prototype Development Center (PDC) and a manufacturing facility that can support, prototyping, engineering development, flight test, special projects, DACT programs and Low Rate Initial Production (LRIP). Located at the Niagara Falls International Airport (KIAG) and has direct access to the airport runway.
The USARC facility, also known as Area Maintenance Center #76, was declared surplus Federal property in 2011 by the Department of Defense under the Base Realignment and Closure (BRAC) process after which it was acquired by the Town of Niagara, NY. In April 2019, the Town of Niagara sold the vacant USARC to a private party. Stavatti entered into a Purchase Agreement to acquire the facility in June 2020 and achieved the rezoning of the 19.8 acre property to Heavy Industrial in September 2020. Providing over 150,000 sq ft of combined high bay hangar and office floor, the center will serve as a primary center for Stavatti prototyping, development and limited production.
Stavatti’s Buffalo, NY office is located at 4455 Genesee Street, Buffalo, NY 14225. Established in 2002, the Stavatti Buffalo office is managed by Dr. Robert Sugarman, Stavatti’s Chief Scientist and Director of Human Factors Engineering.
Domiciled in Wyoming, the Registered Office for Stavatti Aerospace Ltd is located at 30 N Gould Street, Suite 2247, Sheridan, WY 82801.
Stavatti Corporation was founded in Eagan, Minnesota in 1994. Stavatti Aerospace Ltd was also founded in Eagan, Minnesota prior to its reorganization as a Wyoming Corporation in December 2019. While Stavatti Aerospace Ltd has since relocated its corporate headquarters, the Eagan office remains an operating registered office. As Eagan remains a strong center for Minnesota’s aerospace defense industry, Stavatti anticipates that an new engineering development center will be established in Eagan to conduct the design, development and production of novel aircraft, aircraft systems including proprietary flight controls, avionics, sensors, navigation system, communication systems and synthetic intelligence. An international headquarters and principal engineering center for Stavatti Aerospace may also be established in Eagan in the years to come. The mailing address for Stavatti Minnesota is P.O. Box 211258 Eagan, MN 55121.
SAN BERNARDINO, CA
In May of 2016 Stavatti’s diversified industrial manufacturing division, Stavatti Industries Ltd., acquired the production capabilities and manufacturing equipment of Hybrid Technology Inc., based in San Bernardino, California. This led to a strategic partnership with Hybrid Technology and the formation of Stavatti’s San Bernardino Center. The address of the San Bernardino center is 1443 S. Gage Street, San Bernardino, CA 92408
The San Bernardino Center serves as both a site location for Stavatti Aerospace and Stavatti Industries, as well as an engineering, prototyping, machining, manufacturing and production center for both Stavatti and Hybrid Technology. The center’s products include oil field tools and equipment, including cementing heads, as well as landing gear systems, centrifugal and boundary layer turbines and trailer systems, all of which are produced and co-marketed under the Stavatti brand. Stavatti has expanded production to include airframe structures, prototype aircraft, drones, armor, armament systems, and industrial component manufacturing. The center is located in the Tri City Industrial Park and is 3 miles away from the San Bernardino International Airport in support of Stavatti aircraft prototype production and flight testing.
In April 2017 Stavatti Aerospace entered into a Strategic Partnership Agreement with Jugoimport-SDPR and its sister company UTVA Avio Industrija d.o.o. (UTVA) located in Pancevo, Serbia for the purpose of developing and producing new and legacy aircraft, as well as aircraft and aerospace vehicle parts. This strategic partnership resulted in what is now Stavatti’s Pancevo Center.
The Pancevo Center provides Stavatti Aerospace Ltd (Stavatti) with the immediate capability and capacity to produce aircraft and aerospace vehicle parts, components and systems. A 925,000 sq ft aircraft manufacturing plant, the Pancevo Center can employ up to 2,500 qualified aerospace machinists and assembly workers who are capable of prototyping and producing Stavatti aircraft and aerospace products. With a 70 year history of producing aircraft, this center can serve as a principal manufacturing center for Stavatti aircraft for both the European and global market.
The Stavatti-UTVA partnership is a multi-fold relationship focused upon the production of new design as well as legacy aircraft. Serving as a Stavatti production center a variety of planned civil aircraft, the Pacevo Center will serve as manufacturing hub for aircraft produced for the European, Middle East and African markets. This facility can also produce components and integrated assemblies for final aircraft assembly and completion in the USA.